Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
4. Install the shift control attachment nut onto the shift control assembly.
Tighten
Tighten the shift control cable attachment nut to 6 Nm (53 inch lbs.).
5. Insert the shift control cable into the connecting slot on the shift control lever and secure it with the pinch bolt and nut.
Tighten
Tighten the shift control cable adjustment pinch bolt nut to 8 Nm (71 inch lbs.).
6. Install the shift control cable into the engine compartment bracket and secure with the clip.