Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
4. Install the shaft retaining ring onto the axle shaft using the snap ring pliers J-8059.
5. Fill the tripot housing with 195 to 215 g (6.9 to 7.6 ounces) of the recommended grease. Repack the tripot with 195 to 215 g (6.9 to 7.6 ounces)
of the recommended grease.
6. Install the tripot housing onto the tripot assembly.
7. Install the tripot joint retaining ring into the tripot housing.
