Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
10. Tighten the rod clamp bolt.
Tighten
Tighten the rod clamp bolt to 14 Nm (124 inch lbs.).
11. Remove the 5 mm (0.2 inch) gauge pin from the adjustment hole.
12. Install the adjustment hole plug.
13. Remove the 5 mm (0.2 inch) gauge pin from the gearshift lever.
14. Install the boot to the console.
15. Connect the negative battery cable.
