Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Shifter M/T: Service and Repair
Gearshift Tube, Boot, Bushing and/or Bearing Ring
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the rod clamp bolt.
3. Separate the linkage bolt from the gearshift tube.
4. Remove the rod clamp from the gearshift tube.
5. Remove the center console.
6. Position the shift lever into NEUTRAL.
7. Disconnect the gearshift boot from the front portion of the floor console and lift upward to expose the shift control lever mechanism.
8. Rotate the gearshift lever stop clamp and remove it.
