Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
9. Install the gearshift boot.
10. Install the center console.
11. Install the rod clamp onto the gearshift tube.
12. Connect the linkage bolt to the gearshift tube.
13. Install the rod clamp bolt.
14. Adjust the shift linkage.
15. Tighten the rod clamp bolt.
Tighten
Tighten the rod clamp bolt to 14 Nm (124 inch lbs.).
16. Connect the negative battery cable.
