Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
Front Door Weatherstrip: Service and Repair
Door Weatherstrip
Removal Procedure
1. Remove the door hold open link-to-bolt and the door hold open link.
2. Remove the door weatherstrip.
Installation Procedure
1. Install the door weatherstrip.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the door hold open link to the body with the bolt.
Tighten
Tighten the door hold open link-to-body bolt to 27 Nm (20 lb.ft).