Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
ABS Main Relay: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the left-side kick panel.
3. Slide the relay connector off the top of the I/P fuse block.
4. Remove the ABS enable relay from the connector in the wiring harness.
Installation Procedure
1. Install the ABS enable relay to the electrical connector.
2. Install the connector into its mount on top of the I/P fuse block.
3. Install the left-side kick panel.
4. Connect the negative battery cable.