Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
Camshaft Gear/Sprocket: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the timing belt.
3. Remove the spark plug cover bolts.
4. Remove the spark plug cover.
5. Disconnect the ignition wires from the spark plugs.
6. Disconnect the crankcase breather tubes from the valve cover.
7. Disconnect the camshaft position sensor.
8. Remove the valve cover bolts.
9. Remove the valve cover washers.
10. Remove the valve cover and the valve cover gasket.
Notice: Take extreme care to prevent any scratches, nicks or damage to the camshafts.