Nubira SX Wagon L4-20L DOHC D-TEC Timing Belt Specifications
3. Install the timing belt.
4. Turn the hex-key tab in a clockwise direction to tension the belt. Turn until the pointer aligns with the notch.
5. Install the automatic tensioner bolt.
Tighten the automatic tensioner bolt to 25 Nm (18 ft. lbs.).
6. Rotate the crankshaft two full turns clockwise using the crankshaft pulley bolt.
7. Recheck the automatic tensioner pointer.
8. Install the front timing belt cover.
9. Install the front timing belt cover bolts.
Tighten the front timing belt cover bolts, to 6 Nm (53 inch lbs.).
10. Install the right engine mount bracket. Refer to Engine Mount.
11. Install the crankshaft pulley.