Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
2. Install the O2S1 into the exhaust manifold.
Tighten
Tighten the oxygen sensor sensor to 41 Nm (30 lb-ft).
3. Connect the O2S1 connector.
4. Connect the negative battery cable.
2. Install the O2S1 into the exhaust manifold.
Tighten
Tighten the oxygen sensor sensor to 41 Nm (30 lb-ft).
3. Connect the O2S1 connector.
4. Connect the negative battery cable.