Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
3. Install the generator-to-intake manifold and cylinder head support bracket bolts, the generator-to-intake manifold strap bracket bolt, and the intake
manifold-to-cylinder body strap bracket bolts over the starter.
Tighten
Tighten the generator-to-intake manifold and cylinder head support bracket bolts to 35 Nm (26 lb.ft). Tighten the generator-to-intake manifold
strap bracket bolt and the intake manifold-to-cylinder body strap bracket bolts to 20 Nm (15 lb.ft).
4. Connect the harness connector to the back of the generator, if applicable.