Charade L3-0993cc 1.0L (1988)
Belt Direction
23.
Removal of timing belt.
NOTE: If the timing belt is reused, an arrow mark indicating the engine rotation direction should be put on the belt, using chalk.
Idler Pulley Bolt
(a) Loosen the idler pulley bolt. Push the lever as far as it will go and then temporarily tighten it.
Removing Belt
(b) Remove the belt.
CAUTION:
^
Do no bend, twist or turn the belt inside out.
^
Do not allow the belt to come into contact with oil or water.
^
Do not try to pry the timing belt with a screwdriver or the like during the removal or installation.
^
Do not utilize the belt tension when installing or removing the set bolt of the camshaft timing belt pulley.
Idler Pulley And Return Spring
