Charade L3-0993cc 1.0L (1988)
Water Pump Pulley
10.
Installation of water pump pulley.
Temporarily tighten the attaching bolt of the water pump pulley.
Tighten the attaching bolt, while preventing the ring gear from turning, using a flat screwdriver.
Tightening Torque:
0.6 - 0.9 kg-m (4.3 - 6.5 ft-lb, 5.9 - 8.8 Nm)
Front Mounting Bracket
11.
Install the front mounting bracket to the cylinder head.
Tightening Torque:
M12 Bolt 5.0 - 7.0 kg-m (36.2 - 50.6 ft-lb., 49.0 - 68.6 Nm)
M10 Bolt 3.0 - 4.5 kg-m (21.7 - 32.5 ft-lb., 29.4 - 44.1 Nm)
12.
Tighten the front mounting bracket together with the front mounting by means of the attaching nuts.
Tightening Torque:
4.0 - 5.5 kg-m (28.9 - 39.8 ft-lb., 39.2 - 53.9 Nm)