Charade L4-1295cc 1.3L (1989)
Fig. 2 Removing Caliper Piston
4.
With a wooden piece or a cloth placed at the end of the disc cylinder, Fig. 2, drive out the piston by applying compressed air.
5.
Detach the piston seal using a suitable screwdriver, do not score cylinder wall.
6.
Apply lithium soap base glycol grease to piston and caliper, caliper boot and piston seal, inner surface of mounting pin and boot groove, sliding
bushing and pin boot.
7.
Install piston seal in caliper.
8.
Install the piston into the caliper. Do not tilt piston during installation.
9.
Assemble the cylinder boot in the caliper.
10.
Assemble the cylinder boot set ring. Do not scratch the boot.
