Charade L4-1295cc 1.3L (1989)
Cam Pulley
1.
Measure the maximum width of the timing belt pulley, using vernier calipers.
Camshaft timing belt pulley wear limit:
119.8 mm (4.72 inch)
Crankshaft timing belt pulley wear limit:
59.3 mm (2.33 inch)
If the measured value is less than the specified value, replace the timing belt pulley.
Timing Belt Pulleys
2.
Visually inspect the timing belt pulley for damage. If necessary, replace the timing belt pulley.
CRANKSHAFT TIMING BELT PULLEY FLANGE
Pulley Flange
Check the crankshaft timing belt pulley flange for bend damage and wear.
If necessary replace the crankshaft timing belt pulley flange.