daihatsu Workshop Repair Guides

Daihatsu Workshop Service and Repair Manuals

Ignition System > < Throttle Position Sensor (1.0L/3-60.6)|Page 1302
Page 1
background image

Throttle Position Sensor: Adjustments

1.

Warm engine and check idle speed.

2.

Raise engine speed to 3000 RPM.

3.

Close throttle valve slowly.

4.

Observe engine speed when throttle positioner dashpot lever comes in contact with throttle lever.

5.

If engine speed is not 1500-1700 RPM for 1989 models and manual transmission-equipped 1990 models or 2700-2900 RPM for 1990-92 models
with automatic transmissions, adjust by turning adjusting screw on dashpot.

Ignition System > < Throttle Position Sensor (1.0L/3-60.6)|Page 1302