1500 4x2 Pickup V8-318 5.2L Magnum (1994)
7.
If the vehicle already has the 3 holes for the auxiliary spring bracket, as per Figure 1, skip to step # 9. Otherwise, align template for left front
auxiliary spring bumper bracket hole location, with existing frame hole locations, as shown in Figure 1, mark frame location for 3 (11 mm or 7/16"
dia) holes and drill. Repeat procedure for the other side of the vehicle.
8.
Align template for left rear auxiliary spring bumper bracket hole location, with existing frame hole locations, as shown in Figure 2, mark frame
location for 3 (11 mm or 7/16" dia.) holes and drill. Repeat procedure for the other side of the vehicle.
9.
Install left front auxiliary spring bumper bracket (P/N 52038233) with retainer (P/N 52038359) and 3 bolts (P/N 6101223) torqued to 30 ft. lbs. as