1500 4x2 Pickup V8-5.2L CNG VIN T (1996)
4.
Remove the upper and lower steering column covers (Figure 4).
5
Remove the lower steering column shroud (Figure 4).
6.
Disconnect the 7-way ignition switch electrical connector (Figure 5).
7.
Inspect the 7-way ignition switch connector for heat damage near the 4th and 5th terminals (BLACK with ORANGE tracer and PINK with
BLACK tracer wires) (Figure 5).
^
Look for brown or black discoloration of the wire insulation or melting of the wire insulation near the connector.
^
Check the wiring terminals for discoloration.
^
Inspect the connector for indications of melting or deformation.