1500 4x4 Pickup V8-360 5.9L Magnum (1996)
Daytime Running Lamp Control Unit: Description and Operation
On vehicles built for sale in Canada, the low-beam headlamps operate when the ignition switch is in the RUN position and the park brake switch is
Circuit L10 from fuse 15 in the fuse block supplies voltage to the DRL module. Circuit A3 from the Power Distribution Center (PDC) connects to
The DRL module receives information on park brake switch position on circuit G11.
Circuit L4 powers the low beams of the headlamps. When the headlamp switch is OFF, the DRL module powers the low beams on circuit L4.
When the head-lamps are ON, the multi-function switch powers the low beams on circuit L4.
Circuit L3 feeds the high beams of the headlamps. When the operator flashes the headlamps with the stalk of the multi-function switch, the DRL
senses voltage on circuit L3 and stops supplying power to the low beams on circuit L4. Circuit Z1 provides ground for the DRL module.