2500 4x2 Pickup L6-359 5.9L DSL Turbo (1994)
Electronic Brake Control Module: Description and Operation
With Four Wheel Antilock Brakes
PURPOSE
The Controller - Antilock Brake (CAB) is mounted under the hood, separately from the valve body, and has microprocessor circuits that:
-
Monitor the brake switch input to tell whether or not to prepare for possible antilock braking.
-
Monitor the wheel speed sensor inputs to determine when a wheel is tending to lock up.
-
Operate the integral control unit assembly during antilock braking based on comparing the speed sensors to information programmed in
memory.
-
Detect ABS system related problems and take diagnostic action.
OPERATION
The CAB will disable antilock control and set a soft ignition latched trouble code if it detects one of the following conditions with itself:
-
(71) RAM Read/Write
-
(72) ROM Checksum
-
(73) Watchdog