2500 4x2 Pickup V10-488 8.0L Magnum (1996)
Alignment: Service and Repair
Cab and Chassis Caster Correction Measurement
Cab-Chassis Measurement
NOTE:To determine the correct caster alignment angle for Cab-Chassis vehicles the following procedure must be performed.
1.
Take a height measurement to the center of the front gauge hole in the frame. Take another measurement to the center of the rear spring hanger
bolt. Take these measurements on both sides of the vehicle.
Caster Correction Chart
2.
Subtract the front measurement from the rear measurement and use the average between the right and left side. Use this number with the Caster