2500 4x2 Pickup V8-360 5.9L Magnum (1996)
Fig. 5 Exhaust Pipe Clamp Location
4. Remove the clamp nuts.
5. Disconnect the exhaust pipe from the support hangers.
6. Remove the exhaust pipe.
INSTALLATION
1. Connect the exhaust pipe support hangers.
2. Position the exhaust pipe for proper clearance with underbody parts.
3. Position the exhaust pipe to manifold. Install the bolts, retainers and nuts. Tighten the nuts to 34 N.m (25 ft. lbs.) torque.
4. Tighten the clamp nuts to 43 N.m (32 ft. lbs.) torque.
5. Lower the vehicle.
6. Start the engine and inspect for exhaust leaks and exhaust system contact with the body panels. Adjust the alignment, if needed.