2500 4x2 Pickup V8-360 5.9L Magnum (1996)
EGR Tube: Service and Repair
REMOVAL
1. Remove air cleaner housing.
2. Remove the spark plug cable loom and plug cables from valve cover mounting stud at rear of right valve cover. Position spark plug cables to top
of valve cover.
3. Disconnect two vacuum hoses at exhaust gas recirculation (EGR) valve.
Fig. 1 EGR System Component Location
4. Remove 2 EGR valve mounting bolts and remove EGR valve. Discard old gasket.
5. Disconnect electrical connector at engine oil pressure sending unit.
Fig. 6 Oil Pressure Sending Unit
6. To prevent damage to oil pressure sending unit, a special tool, such as number C-4597 must be used. Remove sending unit from engine.