2500 4x2 Pickup V8-5.9L VIN Z (1994)
3.
Clean the opening in the combination valve with the lint free towel supplied in the kit.
4.
Assemble the metering valve as shown in Figure 2. Make sure that the flat side of the plastic washer is toward the threaded plug as shown.
5.
Install the metering valve and tighten the plug to 15 Ft.Lbs. (20 N-m).
6.
Manually bleed both front calipers (do not use a pressure bleeder).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
05-30-17-91
0.4 Hrs.
FAILURE CODE: 58 - Internal Defect
