2500 4x2 Pickup V8-5.9L VIN Z (1994)
Break In Of "New" Engine
- Degrease, clean and reinstall the plugs.
..................................................................................................................................................................................................................................................
Excessive Valve Guide Clearance
- Repair engine as necessary.
..................................................................................................................................................................................................................................................
Worn Valve Seals
- Replace seals.
..................................................................................................................................................................................................................................................
White or Gray - Burned or Blistered Insulator
DESCRIPTION:
Burned or blistered insulator tips and badly eroded electrodes.
POSSIBLE CAUSE
ACTION
................................................................................................................................................................................................................................................
Overheating
- Check the cooling system.
- Check for sticking heat riser valves.
- Check for lean air-fuel mixture
- Check the heat range of plugs. May be too hot.
- Check spark timing. May be too advanced.
- Check the torque value of the plugs to ensure good plug-engine seat contact.
................................................................................................................................................................................................................................................