2500 4x2 Pickup V8-5.9L VIN Z (1994)
Power Steering Bleeding: Service and Repair
1. With fluid at room temperature, ensure reservoir is at correct level.
2. Allow fluid to settle for a minimum of two minutes.
3. Start and run engine for a few minutes.
4. Add fluid as necessary, then repeat above steps until fluid level is constant.
5. Raise front wheels off ground.
6. Start engine, then slowly turn steering wheel left and right. Lightly contacting stops.
7. Stop engine and check fluid level, fill as necessary.
8. If fluid is extremely foamy, let stand for a few minutes, then repeat procedure.