2500 4x4 Pickup L6-359 5.9L DSL Turbo (1995)
12.
Loosen the jam nut that holds the spacer in place. Cut the tie strap, remove and discard the spacer.
13.
Tighten the jam nut against the end link. Torque the nut to 8.5 Nm (75 in lbs.).
14.
Connect the air supply line onto the actuator and secure it with a new hose clamp (from kit).
15.
Following service manual procedures, reinstall the turbocharger assembly to the engine using the new gaskets (from kit).