2500 4x4 Pickup V8-360 5.9L VIN 5 Magnum (1994)
Rear Closure Panel Trim
5. Remove screws holding bottom of rear closure panel trim to floor.
6. Remove screws holding rear closure panel trim to rear cab wall.
7. Disengage clips holding top of rear closure panel trim to rear cab wall.
8. Remove push-in fastener in top center of rear closure trim panel.
9. Separate rear closure panel trim from vehicle.
10
Reverse the preceding operation for installation.
Overhead Assist Handle
OVERHEAD ASSIST HANDLE REMOVAL
1. Disengage tabs holding assist handle end covers to assist handle.
2. Remove screws holding overhead assist handle to roof rail.
3. Separate overhead assist handle from vehicle.
4. Reverse the preceding operation for installation.