3500 4x4 Pickup L6-359 5.9L DSL Turbo (1996)
Detent Ball And Spring
19. Position pencil magnet next to detent housing to catch detent ball and spring. Then carefully remove Retainer Tool 6583 and remove detent ball
and spring.
Adjusting Screw Bracket Fastener
20. Remove screws attaching pressure adjusting screw bracket to valve body and transfer plate. Hold bracket firmly against spring tension while
removing last screw.
Adjusting Screw Bracket And Spring
21. Remove adjusting screw bracket, line pressure adjusting screw, pressure regulator valve spring and switch valve spring. Do not remove throttle
pressure adjusting screw from bracket and do not disturb setting of either adjusting screw during removal.