3500 4x4 Pickup L6-359 5.9L DSL Turbo (1996)
Wheel Bearing: Service and Repair
Front
Removal
1. Raise and support the vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper and rotor, refer to Brakes, Service and Repair for R&R procedure. See: Brakes and Traction Control/Disc Brake
System/Brake Caliper/Service and Repair
4. Remove cotter pin and axle hub nut.
Hub/Bearing And Knuckle
5. Remove hub/bearing mounting bolts. Remove hub/bearing from knuckle.
Installation
Hub/Bearing And Knuckle
1. Install hub/bearing and tighten mounting bolts to 125 ft. lbs. (170 Nm).
2. Install axle hub nut and tighten to 175 ft.lbs. (237 Nm). Install cotter pin.