3500 4x4 Pickup V10-488 8.0L Magnum (1994)
Fig 35 Vacuum Harness Connector
6. Disconnect the vacuum connector from the back of the heater-A/C control.
7. Release the temperature control cable housing retainer flag and disconnect the cable core from the back of the heater-A/C control.
8. Remove the heater-A/C control from the instrument panel.
INSTALLATION
1. Connect the temperature control cable to the back of the heater-A/C control.
2. Plug the vacuum and electrical connectors into the beater-A/C control.
3. Install the heater-A/C control to the instrument panel with four screws.
4. Install the instrument cluster bezel. Refer to - Instrument Panel Systems for the procedures.
5. Connect the battery negative cable.