3500 4x4 Pickup V10-488 8.0L Magnum (1994)
Fig. 9
8. Connect the 2-way wiring connector to the mating connector on the provided overlay relay harness.
Fig. 8
9. Insert the two wire terminals from the overlay harness into the headlamp switch connector. Insert the PINK wIRED TRACER wire into the
"B2" cavity. Insert the BLACK w/YELLOW TRACER wire into the "R" cavity.
10. Secure the wire terminals in the headlamp switch connector with the provided 9-way wedge.
C. Install the Headlamp Switch Assembly:
1. Install the headlamp switch bezel bracket on the new switch assembly.
2. Install the headlamp switch bezel on the mounting bracket. Tighten the three (3) mounting screws securely.
Fig. 10