3500 4x4 Pickup V10-488 8.0L Magnum (1994)
![background image](/dodge/3500_4x4_pickup/v10-488_8.0l_magnum/Page-212001.png)
Crankshaft Position Sensor: Testing and Inspection
Sensor Connector
1. Disconnect the sensor pigtail harness from the main engine wiring harness connector.
2. Place an ohmmeter across terminals B and C. Ohmmeter should be set to 1K-to-1OK scale for this test. The meter reading should be open (infinite
resistance). Replace sensor if a low resistance is indicated.