400 L4-156 2.6L (1982)
8.
Reinstall coolant drained in Step 1. Start engine and check for leaks and allow to fully warm up.
9.
Check curb idle rpm, readjust if necessary.
FIGURE 3
10.
Type the following information on the Authorized Modification Label PN 4275086 (Figure 3).
Upper Section
Primary Jet Block Installed PN MD082907
Lower Section
Change Authority - TSB #14-49-83. Dealer Code - your dealer code. Date - date this service performed.
11.
Install label next to or near the original VECI label.
POLICY:
Reimbursable within the provisions of the warranty
