400 L4-156 2.6L (1982)
FIGURE 3-A - FUEL PUMP OVERLAY HARNESS ROUTING THROUGH BODY
10A. Reconnect the body-to-instrument panel 2 X 5 way wedge connector in the left side cowl (Figure 3-A).
11.
Install the black 2-way connector on the body overlay harness, PN 4368596 or 4368597, to the black 2-way connector on the instrument panel
overlay harness, PN 4368642 (Figure 3-A).
12.
Reinstall the left side sill scuff plate, left side cowl kick panel, spare tire, and upper and lower rear seat cushions.
D.
Engine Compartment
1.
Remove and discard the 90~ formed hose located between the fuel pump outlet and the carburetor inlet (hose between the fuel pump outlet
and fuel flow sensor inlet, if equipped with fuel flow sensor).
If the vehicle has a fuel reservoir, disconnect the reservoir inlet hose at the pump and the outlet hose at the carburetor (outlet hose at fuel
flow sensor inlet, if equipped with fuel flow sensor). Remove and discard the reservoir and hoses.