dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wheel Bearing|Adjustments|Page 3830 > < Tires - Rubbing During Severe Turning/Braking
Page 1
background image

Wheel Bearing: Adjustments

Fig. 3 Wheel bearing assembly

1. Torque adjusting nut to 270 inch lbs. (30 Nm) while rotating wheel.
2. Stop wheel and loosen adjusting nut.
3. Tighten adjusting nut finger tight. Endplay should be 0.001 - 0.003 inch.
4. Install castle lock with slots aligned with cotter pin hole.
5. Install cotter pin and grease cap.

Wheel Bearing|Adjustments|Page 3830 > < Tires - Rubbing During Severe Turning/Braking