Avenger L4-2.0L DOHC (1995)
20. Air pipe assembly connection <M/T>
21. Pulsed secondary air injection valve <M/T>
22. Heated oxygen sensor connection
-
The exhaust manifold threads must be cleaned with a 18 mm (0.7 in) x 1.5 +6E tap after the heated oxygen sensor has been removed.
-
If reusing the original sensor, coat the sensor threads with an antiseize compoound such as loctite 771-64 or equivalent. New sensors have
compound on the threads and do not require an additional coating.
23. Front exhaust pipe
24. Gasket
INSTALLATION
Reverse procedure to install.