Avenger L4-2.0L DOHC (1995)
4.
Type the necessary information on the Authorized Modification Label and attach the label near the VECI Label.
Duty Cycle Purge Solenoid Replacement (If Required)
1.
Raise the vehicle on a hoist and remove the right front wheel and splash shield to gain access to the duty cycle purge solenoid.
2.
Remove the purge solenoid from its bracket and install new solenoid P/N 4874833.
Note:
Be sure to connect the purge hoses properly to the new solenoid.
3.
Install the splash shield and wheel.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
Control Module Replace, Sebring/Avenger
08-19-44-92
0.9 Hrs.
Labor Operation No:
Control Module Replace, Talon
08-19-44-93
0.8 Hrs.
Related Operation No:
25-01-40-92 Duty Cycle Purge Solenoid, Replace
0.4 Hrs.
FAILURE CODE:
P8 - New Part
