Avenger V6-2.5L VIN N (1998)
Check whether ABS rotor is broken or deformed, and, if so, replace the ABS rotor.
INSTALLATION
1. Follow removal steps in reverse order for installation, noting the following.
2. Use a press and a socket to install rear ABS Rotor.
3. The clearance between the wheel speed sensor and the ABS rotor's toothed surface is not adjustable, but measure the distance between the sensor
installation surface and the ABS rotor's toothed surface.
Standard value: 28.2 - 28.5 mm (1.11 - 1.12 inch).
4. Check wheel speed sensor output voltage.
5. Install Splash Shield (Front only).
