dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Relays and Modules - Steering and Suspension > < Occupant Restraint Controller (ORC) Module - Removal|Page 496
Page 2
background image

1. Connect the ORC jumper harness (2) to the body harness (3).
2. Connect the ORC jumper harness connector (4) to the ORC (1).
3. Install the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Installation.

WARNING: Do not connect the battery negative cable Refer to appropriate testing. Serious or fatal injury may result if the system test is
not performed first.

Relays and Modules - Steering and Suspension > < Occupant Restraint Controller (ORC) Module - Removal|Page 496