Avenger V6-2.7L (2008)
1. Position the transponder (1) and install the mounting nuts.
2. Connect the wiring harness connector (2) to the transponder.
3. Install the wheelhouse splash shield and all components removed to access it. See: Body and Frame/Fender/Rear Fender/Rear Fender
Liner/Service and Repair/Rear Wheelhouse Splash Shield - Installation
4. Perform the TPM Diagnostic Verification Test. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests/Tire Pressure Monitor (TPM) Verification Test
