Avenger V6-2.7L Flex Fuel (2009)
Hood Latch Release Cable: Service and Repair
Hood Release Cable - Removal
REMOVAL
1. Remove hood latchSee: Hood Latch/Service and Repair/Hood Latch - Removal.
2. Remove left front cowl trim panel.
3. Remove screws (2) attaching hood release handle to inner cowl panel (3).
4. Release clips (5) attaching hood release cable to left inner frame rail.
5. Disengage rubber grommet at lower dash panel.
6. Disengage push-in fastener attaching hood release cable (1) to dash panel.
7. Remove hood release cable (1) from vehicle.
