Avenger V6-2.7L Flex Fuel (2009)
5. Slide the brake rotor (2) off the hub and bearing (1).
Rear
REAR BRAKE ROTOR
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Raise and support the vehicle. See: Maintenance
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly.
NOTE: In some cases, it may be necessary to retract the caliper piston in its bore a small amount in order to provide sufficient clearance
between the pads and the rotor to easily remove the caliper from the knuckle. This can usually be accomplished before the guide pin
bolts are removed, by grasping the inboard side of the caliper and pulling outward working with the guide pins, thus retracting the
piston. Never push on the piston directly as it may get damaged.