Avenger V6-2.7L Flex Fuel (2009)
Air Bag Control Module: Service and Repair
Occupant Restraint Controller - Installation
OCCUPANT RESTRAINT CONTROLLER
1. Connect the two ORC connectors (4 and 5) and ensure that the connectors are engaged.
2. Position ORC (3) (arrow pointing forward) on the console floor bracket and mounting studs (1).
3. Install the three ORC retaining nuts (2) and tighten to 9 Nm (79.5 in. lbs.).
4. Install the center console See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Shifter Housing - Installation.
WARNING: Do not connect the battery negative cable See: Restraint Systems/Testing and Inspection . Serious or fatal injury may result if the
system test is not performed first.