Avenger V6-2.7L Flex Fuel (2009)
4. Install the center rear seat belt retractor assembly on the rear shelf. Tighten the bolt to 52 Nm (38.5 ft. lbs.).
5. Install the rear shelf trim panel See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair/Rear Shelf Panel - Installation.
Second Row
INSTALLATION
1. Place retractor and belt (6) into position in quarter panel (1).
2. Install bolt (5) and tighten bolt to 52 Nm (38.5 ft. lbs.).
3. Route seat belt webbing through upper trim panel.
4. Install bolt attaching turning loop (2) to quarter panel (1). Tighten bolt to 52 Nm (38.5 ft. lbs.).
5. Install lower quarter trim panels See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Installation.
6. Install bolt (4) attaching seat belt anchor to floor pan. Tighten bolt to 100 Nm (74 ft. lbs.).
7. Install rear seat cushion See: Body and Frame/Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Installation.