Dodge Workshop Service and Repair Manuals

Alternator: Service and Repair
Generator - Removal

3.5L

1. Disconnect and isolate the negative battery cable remote terminal, See: Battery/Battery Cable/Service and Repair/Battery Cables - Removal.
2. Remove engine cover.
3. Disconnect battery cable from generator.
4. Disconnect electrical connector from generator.

5. Remove accessory drive belt, See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and

Repair/Removal and Replacement/Accessory Drive Belt - Removal.

6. Remove two mounting bolts.
7. Remove generator.