B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Door Lock Cylinder: Service and Repair
Removing Door Lock Cylinders
KEY LOCK CYLINDER REMOVAL
1. Raise the window glass to the completely closed position.
2. Remove the door trim panel (or, if applicable, the access panel) and the waterdam.
Door Latch
3. Disconnect the lock cylinder-to-latch rod at the door latch.
Key Lock Cylinder
4. Remove the key lock cylinder clip retainer and remove the lock cylinder from the door.
5. If being replaced, remove the lock cylinder-to-latch rod from the original lock cylinder and attach it to the replacement lock cylinder.
INSTALLATION
1. Install the gasket and position the lock cylinder in the door hole. Retain the lock cylinder with the clip retainer clip.
2. Connect the lock cylinder-to-latch rod to the door latch.
3. Test (and adjust, if necessary) the door lock cylinder-to-latch rod operation.
4. Install the door waterdam and trim panel, or, if applicable, the access panel.
