B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Headlamp Switch: Service and Repair
1. Disconnect battery ground cable.
2. Remove steering column lower cover, then the hood release handle retaining screws.
3. Working under instrument panel, depress stem locking button on bottom of switch and at same time pull knob and stem from switch.
4. Remove six instrument cluster hood and switch bezel attaching screws, then pull bezel off retaining clips.
5. Remove switch bezel mounting screws, then the illumination bulb from its socket.
6. Remove switch mounting nut from panel, then the switch, disconnect wiring harness connector.
7. Reverse procedure to install.
