B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
1. Position the power regulator in the door and retain it on the inner door panel with 1/4-20 x 1/2 bolts and nuts. Tighten the nuts with 10 Nm (90 in.
lbs.) torque.
2. Connect the regulator motor wire harness connector.
3. Raise the glass, slide it rearward and engage the channel with the regulator arm roller.
4. Install the vent window.
5. Test the window glass and regulator operation. Correct as necessary.
6. Install the door waterdam and the trim panel.
