B250 3/4 Ton Van V8-360 5.9L VIN T 4-bbl (1982)
![background image](/dodge/b250_3/4_ton_van/v8-360_5.9l_vin_t_4-bbl/Page-205015.png)
FIGURE 3-F - BODY WIRING
NOTE:
HARNESS SHOULD BE TIGHT IN THIS AREA THE WRAP IN FOUR
(4)
PLACES (FIGURE 3-E).
3.
At engine compartment, route harness through existing speedometer cable clips to bulkhead connector. If excess wiring exists; loop, tie wrap (2),
and install into existing clip (Figure 3-F).